regarding aluminum honeycomb panel

regarding aluminum honeycomb panel

The panel is mainly used 3003H24 aluminium alloy or 5052AH14 high manganese aluminium alloy quality as base material, plate thickness of 0.8~1.5mm fluorocarbon coating plate or high light resistant paint, color paint in the scratch resistant, acid rain corrosion and discoloration, self-cleaning performance is better than PVDF, slab thickness is 0.6~ 1.0mm, a total thickness of 25mm.

Core material using hexagonal type 3003 aluminum honeycomb core, aluminum foil thickness 0.04~0.06mm, length 5~6mm, the roll forming technology to complete it, back skin forming, automatic machines, folding, is back in the installation side, tightly bite epidermis. The whole process is completed in modern chemical plant, using hot press molding technology, due to high thermal conductivity aluminum skin and honeycomb value between the inner and outer aluminum skin, thermal expansion and contraction synchronization; a honeycomb holes aluminum skin, make plate gas can flow freely; slidably mounted in heat bilges cold shrink fastening system will not cause the structural deformation, therefore can guarantee the smoothness high. The bonding glue: two-component polyurethane high temperature curing adhesive, with automatic honeycomb composite panel production equipment by pressurized high temperature compound and into, to overcome the brittleness problems before the adhesive layer of honeycomb board. The inner layer is made of aluminum honeycomb, the hardness of aluminum alloy H19, as the core plate is adhered in the sandwich structures, in tangential stress. Dense cellular these competing like many small beams, can be dispersed from the panel direction pressure, so that the plate stress is uniform, the panel in a large area can still maintain a very high flatness.

When installing the installed on both sides, no mechanical failure. Sliding installation buckle system allows for expansion and contraction, plate at the bottom of the slide fastener will be expansion direction control board. 25MM implicit glue joint system is beautiful and has a self-cleaning function. A honeycomb panel production is completed, both inside and outside the plate and the cellular structure to form a whole in addition, hollow honeycomb can greatly weakened the plate thermal expansion.

Due to cellular materials with high pressure, shock absorption, sound insulation, heat insulation, flame retardant and high specific strength. Sixty years abroad, has been used in civil fields, and a fast development, our country in recent years the cellular technology in the field of civil industry. Aluminum honeycomb panel curtain wall with its light weight, high strength, high stiffness and many other advantages, has been widely used in the decoration of the external walls of high-rise building. The total thickness of 15mm, the panel plate are 1.0mm aluminum honeycomb plate thickness is only 6Kg/ square meters. With honeycomb panel weighs the same stiffness only single aluminum plate 1/5, 1/10 steel plate, aluminum honeycomb core are connected with each other as a I-steel, core layer arranged in the whole panel, make the plate more stable, the wind resistance performance greatly exceeds the aluminum back board and aluminum single plate, and has not easy to deformation, characteristics of planar degree good, even if the honeycomb plate grid size. Flatness can achieve very high, the building industry preferred lightweight materials.

Characteristic

Center for aluminum honeycomb, small density (per square meter of about 3 ~ 7 kg), is the same thickness and area 1/5 of the weight of wood, glass, aluminum 1/6 1/7, greatly reduce the building load and cost, because the interlayer containing a large amount of air, noise (airborne sound insulation, heat insulation (up to 30dB) thermal resistance of up to 0.02 (m, K/W)), non combustible material, fireproof grade B1, waterproof, moisture-proof, non harmful gas release, unit mass of high specific strength, high specific stiffness (the stiffness of the structure is 1.7 times the rib type), not easy to deformation, completely overcome the other decorative plate deformation, in a single area of large middle collapse defect processing application is convenient, can be arbitrary cutting edge, surface fluorocarbon coating insurable product life in 30 years, aluminum honeycomb panels with surface smoothness high, good anti-seismic performance, only the glass curtain wall than the weight of 1/8; 22mm thick standard parts in 1 meters of simply supported, the deflection is 10mm load can reach more than 700 kilograms force.

After the surface of fluorocarbon resin processing corrosion resistance strong, which can be widely used for building wall, roof, the only large window signs and inner wall decoration. Aluminum honeycomb panel front plate with E. C. C. A. quality standard PVDF fluorocarbon paint, divided into ordinary color and metallic color. So the surface also has excellent weathering properties. The structure and form of innovation to follow natural products tend to mimic the natural, human inventions are all affected by the nature of inspiration, and adapt to the nature of the request. Aluminum honeycomb panels with its light weight, high strength, high stiffness and many other advantages, has been widely applied to the building external wall decoration.

Having the same stiffness of honeycomb sandwich panel weighs only aluminum 1/5, 1/10 steel plate. The total thickness of 15mm, the panel is 1.0mm, plate for aluminum honeycomb panel 0.8mm, weight only 6 kg / square meters. Honeycomb core are connected with each other as a I-steel, core layer arranged in the whole panel, is not easy to produce shear, the plate is more stable, more resistant to bending and compression, the wind resistance is greatly beyond the aluminum plate and the aluminum plate, and is not easy to deformation, the characteristics of good flatness, even cellular board size is large, can achieve very high flatness due to cellular honeycomb composite plate is divided into many closed chamber, to prevent the air flow, the heat and sound wave is severely restricted, therefore, the heat insulation, thermal insulation, sound insulation effect. On 100 -3200HZ source long bath is 20~30dB, coefficient of thermal conductivity is 0.104-0.130W/M.K, so the aluminum honeycomb energy absorption capacity of 150-3500KJ/M² is an ideal energy-saving materials.

In case of heavy rain, rain on the single aluminum plate or aluminum plate when the noise is very big, and the honeycomb panel to avoid this situation. Aluminum honeycomb panels using fluorocarbon coating on aluminum panel.